QSI 583WS 8.3MP CCD Camera

The QSI 683 uses the Kodak KAF-8300 sensor. The array is 3326×2504 with 5.4μm pixels. It has a 16-bit ADU plus dual analog processing chains that can either capture images in high quality mode with the highest possible SNR, or in high speed mode that can download multiple frames per second. It also uses a mechanical shutter.

This is a monochrome camera with an integrated five position filter wheel using either 1.25″ mounted, or 31mm unmounted filters. Having the filter wheel inside the camera allows using the smaller diameter filters with no vignetting for optical systems as fast as f5 or f2.8 respectively.

​This particular model does not have the integrated off axis guider, but I didn’t need it since I prefer to use a separate guide scope and camera.


The 683 has a two-stage TEC with dual cooling fans, and can reach a max 45 degrees below ambient at 85% power.

The camera has a USB 2.0 interface plus a guider port, and comes with a low noise 12VDC switching power supply.


Page last edited 11/12/2026